Product ID:2000 FIRESTOP SEAL
MSDS Date:09/18/1985
FSC:8030
NIIN:00F019208
MSDS Number: BLPQS

DOW CORNING CORP

SOUTH SAGINAW RD
MIDLAND, MI 48686

Emergency Phone: (517) 496-5900

Info Phone: (517) 496-5900

Preparer: JACK L. SHENEBERGER

Cage: 5D028

DOW CORNING CORP

997 MIDLAND, MI 48686-0997 US

Telephone: 517-496-6000/517-496-6315

Cage: 5D028

DIMETHYLFORMAMIDE

CAS: 68-12-2

RTECS: LQ2100000

Fraction By Weight: 1%

OSHA PEL S, 10 PPM

ACGIH TLV: S, 10 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SILICONE

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: DISCOMFORT & PAIN. SKIN:
IRRITATION. INHALATION: IRRITATION & PAIN TO RESPIRATORY PASSAGES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: DISCOMFORT & PAIN. SKIN: IRRITATION.
INHALATION: IRRITATION & PAIN TO RESPIRATORY PASSAGES.
Medical Cond Aggravated by Exposure:ALLERGIC CONDITIONS

First Aid:EYES: FLUSH W/WATER. SKIN: WIPE OFF & FLUSH W/WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:OC
Flash Point:>250F
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.

Spill Release Procedures:REMOVE PRODUCT & USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.

Handling and Storage Precautions:STORE <90F. USE ONLY W/ADEQUATE
VENTILATION. DON'T USE IN CONFINED OR POORLY VENTILATED SPACES.
DON'T PUT IN MOUTH. AVOID EYE & SKIN CONTACT.
Other Precautions:USE REASONABLE CARE & CAUTION.

Respiratory Protection:USE ORGANIC VAPOR TYPE RESPIRATOR UNLESS
VENTILATION IS ADEQUATE
Ventilation:MECHANICAL (GENERAL): RECOMMENDED. LOCAL EXHAUST: ADEQUATE.
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:REMOVE/WASH CONTAMINATED CLOTHING BEFORE REUSE.
WASH AT MEALTIME, END OF SHIFT, BEFORE EATING OR SMOKING.
Supplemental Safety and Health

Spec Gravity:1.45
Solubility in Water:<0.1%
Appearance and Odor:GRAY, PASTE-LIKE W/SLIGHT ODOR

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL
Stability Condition to Avoid:TEMPERATURES >90F.
Hazardous Decomposition Products:METAL OXIDES, CO2, TRACES OF
INCOMPLETELY BURNED CARBON PRODUCTS
Conditions to Avoid Polymerization:AIR OR MOISTURE

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS CONCERNING HEALTH/POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.